 |
| Tipp | Schnittstärke (mm) | Schneidsauerstoff (psig) | Kraftstoff (psig) | Öffnung (mm) |
| 780A07 | 1-3 | 3,0-5,0 | 0,5-1,0 | 0.8 |
| 780A10 | 6-10 | 5,0-7,0 | 0,5-1,0 | 1.0 |
| 780A12 | 20-40 | 5,0-7,0 | 0,5-1,0 | 1.2 |
| 780A15 | 60-80 | 5,0-7,0 | 0,5-1,0 | 1.6 |
| 780A20 | 80-125 | 5,0-7,0 | 0,5-1,0 | 2.0 |
| 780A25 | 125-200 | 5,0-7,0 | 0,5-1,0 | 2.4 |
| 780A30 | 200-250 | 5,0-7,0 | 0,5-1,0 | 2.8 |
| Tipp | Schnittstärke (mm) | Schneidsauerstoff (psig) | Kraftstoff (psig) | Öffnung (mm) |
| 780A07 | 1-3 | 3,0-5,0 | 0,5-1,0 | 0.8 |
| 780A10 | 6-10 | 5,0-7,0 | 0,5-1,0 | 1.0 |
| 780A12 | 20-40 | 5,0-7,0 | 0,5-1,0 | 1.2 |
| 780A15 | 60-80 | 5,0-7,0 | 0,5-1,0 | 1.6 |
| 780A20 | 80-125 | 5,0-7,0 | 0,5-1,0 | 2.0 |
| 780A25 | 125-200 | 5,0-7,0 | 0,5-1,0 | 2.4 |
| 780A30 | 200-250 | 5,0-7,0 | 0,5-1,0 | 2.8 |
