 |
| Tipp | Schnittstärke (mm) | Schneidsauerstoff (psig) | Kraftstoff (psig) | Öffnung (mm) |
| 54-00 | 0-5 | 1,0-1,5 | 0.3 | 0.8 |
| 54-0 | 5-10 | 1,0-2,0 | 0.3 | 1.0 |
| 54-1 | 10-15 | 1,5-2,5 | 0.3 | 1.2 |
| 54-2 | 15-30 | 2,0-3,0 | 0.4 | 1.4 |
| 54-3 | 30-40 | 2,5-3,5 | 0.4 | 1.6 |
| 54-4 | 40-50 | 3,0-4,0 | 0.4 | 1.8 |
| 54-5 | 50-100 | 3,5-4,5 | 0.5 | 2.0 |
| 54-6 | 100-150 | 4,5-5,5 | 0.5 | 2.4 |
| 54-7 | 150-250 | 5,5-6,5 | 0.5 | 2.8 |
| 54-8 | 250-300 | 6,0-7,0 | 0.5 | 3.2 |
| Tipp | Schnittstärke (mm) | Schneidsauerstoff (psig) | Kraftstoff (psig) | Öffnung (mm) |
| 54-00 | 0-5 | 1,0-1,5 | 0.3 | 0.8 |
| 54-0 | 5-10 | 1,0-2,0 | 0.3 | 1.0 |
| 54-1 | 10-15 | 1,5-2,5 | 0.3 | 1.2 |
| 54-2 | 15-30 | 2,0-3,0 | 0.4 | 1.4 |
| 54-3 | 30-40 | 2,5-3,5 | 0.4 | 1.6 |
| 54-4 | 40-50 | 3,0-4,0 | 0.4 | 1.8 |
| 54-5 | 50-100 | 3,5-4,5 | 0.5 | 2.0 |
| 54-6 | 100-150 | 4,5-5,5 | 0.5 | 2.4 |
| 54-7 | 150-250 | 5,5-6,5 | 0.5 | 2.8 |
| 54-8 | 250-300 | 6,0-7,0 | 0.5 | 3.2 |
